How to find the best Oak Panels in Melbourne at least time and fiscal estimate?

Before we are going to play with Oak Panels in Melbourne region, we need to know about it briefly so that we can choose it wisely for our various applications. An oak panel comes from a tree called oak that is classified in the genus Quercus and is fallen into the beech family. If you do a bit research on oak panels you will see there are almost 600 extant species of oak panels are available in the market. The variation of oak is depending upon the growing condition from tree to tree. Now the question is how to distinguish various species type. Well to understand the species more conveniently, manufacturers have designed Oak Panels in Melbourne region into two particular groups. One is the red oak group and the other is a white oak group. We are dividing the two groups as follows:-

Red oak panel group:

This group is consisting of some beautiful grain oak panels such as:-

• Black oak
• California black oak
• Cherry bark oak
• Laurel oak
• Pin oak
• Scarlet oak
• Shumard oak
• Southern red oak
• Water oak
• Willow oak

White oak panel group:

This group also consists of some fabulous Oak Panels in Melbourne region. Below are some examples:-

• Bur oak
• Chestnut oak
• English oak
• Holm oak
• Oregon white oak
• Over cup oak
• Post oak
• Sessile oak
• Swamp chestnut oak
• Swamp white oak

Is there any characteristic difference between Red oak and white oak?

Well, there are some differences between these two. Below are some distinct characteristics:

• If we compare the tendency of rot, white oak has fewer tendencies to rot compared to the red one. Therefore white oak panels are pretty much useful for the water-holding application. These days it is vastly using in furniture and boat. We will discuss the implementation of Oak Panels in Melbourne in details later on. Whereas red can be used in various interior pieces such as cabinets, indoor furniture and in flooring also.

• If we consider the density term, white oak is denser than the red oak. Red oak is lighter and porous and has open grain. Therefore white oak is slightly expensive than the red oak.

How to distinguish between red oak panels and white oak panels?

We have already gathered some knowledge regarding the red oak group, white oak group and the characteristic difference between these two. Now we will focus on the distinction part that means how we can distinguish this two oak group. Below are some methods, look carefully.

Focus on the end grain:

It is one of the quick and reliable ways to determine whether the Oak Panels in Melbourne is either red oak or white oak. For this work, you need to look over the ends of the oak board that can’t be rough-swan, sealed or painted. The method is that if you find the growth rings are porous and widely open and is easily identifiable, then it is none other than the red oak. Because in a white oak panel the pores are generally plugged with tyloses that help white oak to get watertight vessels and make it highly resistant to rot and decay. One can consider tyloses as the most reliable and distinguishable thing to distinguish the difference between two Oak Panels in Melbourne region. But before doing the task, you need to ensure the following two things:

• First, make sure that you have cleaned up the panels properly so that the end grain is bright enough to see the pores clearly. To avoid the false-positive, i.e., the mistake that has been created from sawdust clogged in the pores gap for tyloses.

• The second thing you need to ensure that you are only viewing the heartwood section of the board. Because in white oak there are lots of abundant tyloses in the heartwood section that frequently gets lack when it turns into the sapwood section.

Look at the rays of the panels:

It is not a difficult task to find out the rays of Oak Panels in Melbourne region. If you look over into the face of a panel especially the flat-swan areas, you will notice lots of dark brown streaks are running with the wood grain, it is known as the rays. In red oak panels, you will find a short range of rays typically between 1/8 inch to ½ inch, whereas in white oak panels you will get a bit longer rays typically exceeding ¾ inch on most of the boards.

With the help of Sodium Nitrate:

This technique is generally used in sawmills to short out the logs from various options. It is also a fast process to determine the types of Oak Panels in Melbourne region. You only need a solution of 10 per cent of sodium nitrate that has to spray or brush onto the wooden panels and need wait and observed. If you observe small color changes on the panels and makes it slightly darker, then be confirmed that it is a red oak panel. But if you find a noticeable color change that stays longer as five minutes and turns the panels into almost black, be confirmed that it is a white oak panel.

What are the uses of Oak Panels in Melbourne?

Oak panels have various applications. Nowadays it is widely using as flooring, furniture, parquet boards and so on.


The oak panel that is providing by Profile Timber Floors is mainly using as a flooring material. In various hardwoods flooring, you will find red oak lumber mostly. In some place, you will find European Oak Flooring in Melbourne also. You can use it in dance studios or in the areas where a hardwearing surface is pretty much essential. Red oak panels are also applying to make red oak veneer sheets that have vast use to create laminate flooring.


It is one of the main applications of Oak Panels in Melbourne. Since it has beautiful grain, so it will be the perfect choice for the furniture in the living room and bedroom. You can also use the oak made furniture in your kitchen or use it as your outdoor products.

Apart from these two, you can use it on a vast range of applications such as doors, window sills, wall panels, stairs, parquet boards and so on.

Cleaning of oak panels:

To clean your Oak Panels in Melbourne region, you only need a wire brush to remove the mold from the panel surface if you find it. With a soft touch you can remove the entire mold, just make sure you are using any kind of flat brush like metal. Use nylon brush along with soft bristles only. For more guides, contact Profile Timber Floors today.

Post By : admin October 21, 2016