INSTALLATION


At Profile Timber Floors we specialize in the Installation of Timber Flooring, European Oak, Parquetry and Engineered Flooring. Our trained staff will work with you to ensure that the correct system is used for your project.


Tongue and Groove Timber Flooring can be fixed to a Varity of Substrates
  • Plywood
  • Battens
  • Chipboard
  • Yellow Tongue
  • Existing Flooring
  • Joists and Battens

The boards are usually glued and top nailed or secret nailed in these application. Tongue and Groove board profiles include face-nail and secret nailing designs.

Face Nailing described the process of driving nails through the top face of the board into the sub floor. When the floor is sanded and polished the nails are punched below the surface of the board and the hole filled with the suitably colored filler.

Secret Nailing describes the process of fastening through the tongue of the board into the sub floor. Each subsequent board then conceals the nailed board. This results in the top board being left unmarked. In the past secret nailed boards where limited to 85mm, however an exclusive range of WIDE BOARD OVERLAY is available in store that allows for the board to be glued and secret nailed

Engineered Flooring can be Fixed Over
  • Concrete Slab
  • Existing Tiles
  • Existing Flooring
  • Chipboard
  • Yellow Tongue

The boards are usually floated or can be directly glued to a sub floor

Parquetry & Panels can be fixed over
  • Concrete Slab
  • Existing Tiles
  • Existing Flooring
  • Chipboard
  • Yellow Tongue

The blocks and panels are usually glued to the sub floor

Laying Guidelines, which also give helpful information regarding preparation before installation are available upon ordering timber.